Our accumulator safety block is a multi-functional valve placed between the hydraulic accumulator and the operating system.
The safety block allows for isolation of the accumulator for maintenance or system testing, and will function as an emergency shut-off device or pressure relief valve to protect the hydraulic system from over-pressurization or system failure.
Our accumulator safety blocks incorporate the following components:
- 90-degree full-orifice ball valve to isolate the accumulator from the system
- Manual adjustable safety relief valve
- Manually-operated bleed valve; bleeds down accumulator safely
- Optional female port for pressure gauge options
- Manual release handle standard
| Safety Block | Bleed Valve | Accumulator Side Connection | Discharge Side Connection | Gauge | Example | |
|---|---|---|---|---|---|---|
| ASB | M | FK3 | FK3 | G | = | ASB-M-FK3-FK3-G |
| 800 SERIES CONFIGURABLE SAFETY BLOCK | |||||
|---|---|---|---|---|---|
| Safety Block | Bleed Valve | Description | Accumulator Side Connection | Discharge Side Connection | Gauge |
| ASB Configurable Accumulator Safety Block Core | M | Split Flange Kits (includes o-ring(s), bolts, and washers) | FK3 2" Code 61 | FK3 2" Code 61 | G1 3000 PSI dry |
| FK6 1.5" Code 62 | FK6 1.5" Code 62 | G2 3000 PSI liquid fill SS |
|||
| Adapter Connector Kits - 3000 psi (includes split flange kit) | A31 2" NPT (female) | A31 2" NPT (female) | G3 5000 PSI dry |
||
| A36 1 7/8"-12 SAE (male) | A36 1 7/8"-12 SAE (male) | G4 5000 PSI liquid fill SS |
|||
| Adapter Connector Kits - 6000 psi (includes split flange kit) | A61 1 5/8"-12 SAE (male) | A61 1 5/8"-12 SAE (male) | G5 6000 PSI dry |
||
| A62 1 7/8"-12 SAE (male) | A62 1 7/8"-12 SAE (male) | G6 6000 PSI liquid fill SS |
|||
| E | Four Bolt Flange Adapter Plate Kits (includes o-ring(s), bolts, and washers) | P31 2" NPT (female) | P31 2" NPT (female) | 00 (none) |
|
| P61 1.5" NPT (female) | P61 1.5" NPT (female) | 00 (none) |
|||
| P66 1 7/8”-12 SAE (female) | P66 1 7/8”-12 SAE (female) | 00 (none) |
|||
| No Connection (block is drilled for split and four-bolt flanges) | 000 (none) | 000 (none) | 00 (none) |
||
This model is designed for our 2.5 through 15 gallon accumulators. Best suited for use with SAE split flange connections for ease of installation and maintenance. The SAE split flanges are either code 61 or code 62 series. This model is rated up to 5800 PSI MAWP.
- Optional solenoid-operated dump valve
- Optional lock-out plate included that can restrict access to valve position
800 Series
| 850 SERIES FIXED-PORT SAFETY BLOCK | ||
|---|---|---|
| Safety Block-Manual Bleed Valve 1 5/8”SAE Connections | Complete package with fixed connections. Gauge is optional. | ASB-850-1 |
| Safety Block-Manual Bleed Valve 1 1/16” SAE Connections | ASB-850-2 | |
Other sizes and types of connections are available. Contact us for details and pricing.
Flange kits, adapter kits, adapter plates, gauges, bolts, washers, and seals can be ordered separately as replacement parts. Optional solenoids as well as custom parts are also available. Contact us for details and pricing.
Our 850 series block is designed for use with our 1 quart and 1 gallon bladder accumulators equipped with female SAE fluid ports. Safety block outlet port is available in SAE -8, -12 and -20 sizes. This model is rated up to 5000 PSI MAWP.
850 Series
Most hydraulic accumulators need to be precharged with dry nitrogen gas before operation. Accumulators, Inc. nitrogen gas boosters are designed to boost gas pressure directly from nitrogen cylinders to outlet pressures as high as 10000 psi. Our unit ensures maximum outlet pressure will be maintained even if the pressure in the nitrogen cylinders drops as low as 500 psi.
Our booster is a driven by a typical industrial-style shop-air compressor, typically between 70 and 100 psi. If compressed air is not available, the booster can also be driven directly by the nitrogen cylinders. In the shop-air drive mode, non-contaminated outlet gas is assured through complete dual-vented separation from the drive section. The high pressure section of the booster is cooled by the drive exhaust gas and requires no lubrication. Valves and gauges are stainless steel and are line-mounted to the booster, which features a painted, aluminum tube frame with carry handles.
CONTROLS INCLUDED
- Single acting double drive gas booster configuration.
- Automatic control to stop/restart the booster when the outlet pressure exceeds set point; pre-selected pressure up to 6000 psi (adjustable, depending on model).
- Manual start and stop
- High pressure air controls (HP regulator, relief valve, inlet & regulated outlet gauges and on/off valve)
- Adjustable safety relief valve
- Gas inlet and outlet gauges
SPECIFICATIONS
- Dimensions: 30”L x 12”D x 12”H
- Weight: 60 pounds
- Maximum outlet pressure: 6000, 7500, or 10000 psi
For assistance determining the appropriate accumulator size for your application, please contact us.
| PART NUMBER | OUTLET PRESSURE RANGE |
|---|---|
| AI-NGB-6000 | 0-6000 PSI |
| AI-NGB-7500 | 0-7500 PSI |
| AI-NGB-10000 | 0-10000 PSI |
Sometimes an application requires that you know the exact location of the floating piston inside an accumulator. We offer a variety of piston position sensors for your needs. Please contact us to discuss your application.